The Model #: UGB-04sNS
This model is a 4 string Gourd Uke Banjo.
It has a play scoop & the neck is attached to the pot rod at the heal.
A very playable, strong & durable instrument is the result.
The Serial #: RPOSRN1010
_______________________________________________
Todays work:
The neck is setting up in the shop right now.
It will be there for 24 hrs before the next set of lumber is glued.
As you can see glue was only applied were needed
.(to the left of the boards directly under the clamps)
The neck and headstock fit nicely on the (suitable) wood for the neck.
The rest is unglued which leaves the trimmings (not suitable for my instruments) for another project.
The neck is of fine quality, highly figured & tightly grained ceder.
_____________________________________________
Absolutly beautiful !!
_____________________________________________
Here is a shot of the templates made today as promised.
I use 1/4 graph paper & clear tape.
The templates get traced onto the wood & eventually once the project is done & the results are in. I decide if the design is a keeper or if it needs any changes.
Then I'll make a clear plastic (1/8") rendition for future projects.
No comments:
Post a Comment